QFX10002-36Q – Juniper QFX10002-36Q 40G Ethernet Switch

QFX10002-36Q Technical Specifications

Juniper QFX10002-36Q Ethernet Switch

Capacity
Type: ARP entries
Value: 144,000
Type: Equal-Cost Multipathing (ECMP) ways
Value: 64
Type: GRE tunnels
Value: 4,096
Type: IPv4 forwarding information base (FIB)
Value: 256,000
Type: IPv4 routes
Value: 2,000,000
Type: IPv4 routes (Multicast)
Value: 128,000
Type: IPv6 forwarding information base (FIB)
Type: IPv6 routes
Type: IPv6 routes (Multicast)
Type: Queues per port
Value: 8
Type: Virtual interfaces (VLANs)
Value: 4,000
Type: Virtual output queues
Value: 384,000
Dimensions & Weight
Depth: 31 in
Height: 3.5 in
Weight: 50.71 lbs
Width: 17.4 in
Environmental Parameters
Operating Humidity Range: 5 – 90% (non-condensing)
Storage Humidity Range: 5 – 95% (non-condensing)
Max Operating Temperature: 104 °F
Max Storage Temperature: 158 °F
Min Operating Temperature: 32 °F
Min Storage Temperature: -40 °F
Header
Brand: Juniper
Compatibility: PC
Manufacturer: Netscreen
Model: QFX10002-36Q
Packaged Quantity: 1
Product Line: Juniper QFX Series
Interface Provided
Comments: Management
Qty: 1
Type: Console
Connector Type: QSFP+ (breakout compatible)
Qty: 36
Type: 40Gbit LAN
Connector Type: RJ-45
Type: 1000Base-T
Connector Type: SFP
Connector Type: SFP+
Type: USB 2.0
Miscellaneous
Authentication Method: RADIUS, SSH, SSH2, TACACS+
Color Category: Gray
Compliant Standards: BSMI CNS 13438 Class A, CAN/CSA-C22.2 No. 60950-1, CISPR 22 Class A, CISPR 24, EN 300386, EN 55022 Class A, EN 60825-1, EN 60950-1, EN 61000-3-2, EN 61000-3-3, EN55024, ETSI 300 019, FCC CFR47 Part 15 A, GR-63-CORE, ICES-003 Class A, IEC 60950-1, KN22 Class A, REACH, RoHS 6/6, UL 60950-1, VCCI Class A, WEEE
Encryption Algorithm: AES, MD5
Height (Rack Units): 2
Networking
Advanced Switching: Layer 3
Compliant Standards: IEEE 802.1ab (LLDP), IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.3ba, IEEE 802.3u, IEEE 802.3z
Features: 12GB packet buffer, ACL support, ARP support, BOOTP support, CoS, DCBX support, DHCP relay, DHCP server, DiffServ support, DoS attack prevention, EVB TLV, ECN, FCoE support, ICMP Router Discovery Protocol, IGMP proxy, IGMP snooping, ICMP support, IPv4 support, IPv6 support, MIB, MLD snooping, MSTP support, NDP, NTP time synchronization, Port mirroring, PTP, QoS, RSTP support, RARP support, Redundant hot-swappable fans, sFlow, sFlow v5, SNTP support, STP support, System log, URPF, VOQ, VSTP, VLAN support, WRED, WRR queuing
Form Factor: Rack-mountable
Jumbo Frame Support: 9216 bytes
MAC Address Table Size: 256K entries
Manageable: Yes
Ports Qty: 36
Remote Management Protocol: CLI, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2, SNMP 3, SSH, Telnet, TFTP
Routing Protocol: BGP-4, BFD, Bidirectional PIM, CIDR, ECMP, GRE, IGMP, IGMPv2, IGMPv3, MLD, MLDv2, MSDP, OSPF, OSPFv2, OSPFv3, PIM-DM, PIM-SM, PIM-SSM, RIP-1, RIP-2, RIPng, Static IP routing, VRRP
Subcategory: Network hubs and switches
Subtype: 40 Gigabit Ethernet
Type: Switch
Performance
Type: Switching capacity
Value: 1 Bpps
Type: Throughput
Value: 2.88 Tbps
Ports
Qty: 36
Type: 40 Gigabit QSFP+ (breakout compatible)
Power Device
Frequency Required: 50/60 Hz
Installed Qty: 2
Max Supported Qty: 2
Nominal Voltage: AC 120/230 V
Power Consumption Operational: 1000 Watt
Power Provided: 1600 Watt
Power Redundancy: Yes
Power Redundancy Scheme: 1+1
Type: Internal power supply
Processor
Clock Speed: 2.5 GHz
Installed Qty: 1
Manufacturer: Intel
RAM
Installed Size: 16 GB